1.5kw Laser Cutting Machine

Our 1.5KW laser cutting machine costs around ₹18 to 21 lakh and cuts up to 12 mm of mild steel, 3 mm of stainless steel and 2 mm of aluminium across a 3200 x 1600 mm working table. We are Sigma Mechotronics Pvt. Ltd., ISO & CE Certified, with our head office in Odhav and our manufacturing plant in Bakrol, both in Ahmedabad, Gujarat. At Bakrol we fabricate the frame, bed and structure, build the control cabinet, then integrate the components and inspect every machine stage by stage.

Also called a 1500W laser cutting machine, it is the entry power of a flat-bed fiber laser range that goes up to 20KW; our dedicated tube cutting machine also starts at 1.5KW and reaches 12KW. We install and commission it at your factory free of charge, train your operators free for 1 to 3 days, and after-sales service is provided by our company, with 24/7 call support.

1.5KW Laser Cutting Machine Parameter

The 1.5KW rating is the beam power of the fiber laser source, and it sets how thick a metal the machine can cut. Sigma’s 1.5KW machine cuts:

MaterialMaximum thicknessAssist gas
Mild steelUp to 12 mmOxygen
Stainless steelUp to 3 mmNitrogen
AluminiumUp to 2 mmNitrogen

These are maximums, and thinner plate cuts much faster. Mild steel goes thickest because it burns in the oxygen stream, adding its own heat to the beam’s, though the cut face comes out with a thin oxide skin. Nitrogen, used for stainless steel and aluminium, is inert: it only blows the melt clear of the kerf, the slot cut by the beam, so the edge stays bright but the thickness is lower. Aluminium reflects some of the beam back and conducts heat away quickly, so its limit is the lowest.

1500W Laser Cutting Machine: Basic Technical Data

From Sigma’s data sheet for the 1.5KW machine:

Item1.5KW machine
Laser power1500W
Working table3200 x 1600 mm
X / Y / Z-axis travel1600 / 3200 / 125 mm
Maximum linked speed85 m/min
Maximum acceleration0.5 G
X/Y positioning accuracy±0.05 mm
X/Y repositioning accuracy±0.03 mm
Maximum load on the table1000 kg
Machine weight (approx.)3 to 3.5 tonnes
Power demand380V, up to 16KW
Warranty2 years

The table takes a full 10 x 5 ft sheet, and its 1000 kg rating easily carries the heaviest sheet this power cuts: 12 mm mild steel in that size weighs about 440 kg. Sigma’s flat-bed machines are also built on larger standard beds, up to 6500 x 2500 mm, and on custom beds made to your drawing.

The linked speed of 85 m/min is the head’s rapid travel with the beam off, and the 0.5 G acceleration (about 4.9 m/s²) is how fast it reaches that speed; actual cutting speed depends on the metal and its thickness. The accuracy rows mean the head reaches any programmed point within ±0.05 mm and comes back to it within ±0.03 mm. Kerf and focus affect part size too, so measure sample parts cut from your material.

This is basic technical data. For confirmed details, share your bed size with Sigma on WhatsApp and get the full data sheet for your machine.

Components and Makes Used in the 1.5KW Machine

A quotation that says only “1.5KW fiber laser” leaves out most of the machine. Sigma’s 1.5KW machine uses:

ComponentMake
Laser sourceMax / Raycus / IPG (your choice)
Cutting headRaytools / Bochu / OSPRI
CNC controllerBochu FSCUT / Raytools (your choice)
Servo motors, X, Y and Z axesYaskawa
ReducersSHIMPO
Gear and rackYYC
Linear guidesHIWIN / THK
Pressure controlSMC / CKD
ChillerS&A / Hexacool
Gantry-type frameSigma, 3200 x 1600 mm
Electrical control cabinetSigma, separate, with panel AC
ExhaustProvision built in

You choose the laser source and the controller when you order, and that choice has a large effect on the price. The source makes the beam, the head focuses it and feeds assist gas through the nozzle, and the controller turns your drawing into motion. The Yaskawa servos, SHIMPO reducers, YYC rack and HIWIN or THK guides deliver the accuracy figures, the chiller keeps the source and head cool, and the cabinet’s panel AC protects the electronics in a hot, dusty shed.

The machine also offers fly cutting for grids of holes, auto edge finding for sheets loaded at a slight angle, an anti-collision head, and capacitive auto height following that keeps the nozzle gap steady over uneven sheet. The CNC reads DXF and DWG files directly and nests parts to save sheet.

Who Should Buy a 1.5KW Laser Cutting Machine?

A 1.5KW machine suits shops whose jobs are mostly thin and medium sheet, with thick plate only now and then, and first-time buyers who want laser cutting in-house at the range’s entry price, for example instead of sending parts out to a job-work unit. Cutting mainly pipe and tube? Look at Sigma’s laser tube cutting machine, from 1.5KW to 12KW.

Watching the cut settles the question. Sigma will set up a free demo on a 1.5KW machine at a site where one is installed and working, so you can judge that power on real jobs.

1.5KW Laser Cutting Machine Price

Sigma’s 1.5KW laser cutting machine costs approximately ₹18 to 21 lakh. Where your machine falls in that range depends on the configuration, the bed size, and the laser source and controller you choose. The price includes installation, commissioning, operator training and a warranty of 2 years. For the exact price and the current delivery time, ask Sigma on WhatsApp. Sigma’s laser cutting machines page covers every configuration and bed size.

Running Costs

A 1.5KW machine has three running costs: electricity, cutting gas and a few wear parts. Oxygen, used for mild steel, is cheap. Nitrogen, used for stainless steel and aluminium, is needed at high pressure and in larger quantity, so it costs more, and if you cut stainless steel every day, most of your gas bill will be nitrogen. The nozzle and the protective glass in front of the lens wear out with use and are changed from time to time.

What Your Factory Needs Before the Machine Arrives

Have these in place before delivery, so the installation team can start straight away:

  • Space and lifting: room for a 3 to 3.5 tonne machine plus its chiller and separate cabinet, a level floor, and a crane or forklift for unloading.
  • Electricity: a 380V three-phase line with 16KW of spare capacity, checked against the sanctioned load on your electricity bill. The 1.5KW rating covers only the beam; the source, chiller, drives and cabinet draw the rest.
  • Gas and air: oxygen, nitrogen and clean, dry compressed air.
  • Fume extraction: an extractor ducted from the machine’s exhaust point to the outside.
  • Laser safety: an open-type machine is a Class 4 laser product under IEC 60825-1, and its invisible beam and reflections can injure eyes. Mark off the bed area and issue eyewear rated for fiber lasers to anyone inside it, or choose the close body configuration where other people work nearby.

After-Sales Service From Sigma

During commissioning, Sigma’s engineers set the cutting parameters for your own metals and thicknesses. After that, after-sales service is provided by our company, with 24/7 call support, a warranty of 2 years covering manufacturing defects, spares stocked in India, and an annual maintenance contract (AMC) once the warranty period is over. More detail is on the why choose Sigma page.

Mistakes to Avoid With a 1.5KW Machine

  1. Buying for the maximum thickness. Plate near the 12 mm limit cuts slowly; if it is daily work, it needs a higher-power machine.
  2. Picking the bed without checking your sheets. A 3200 x 1600 mm table holds sheets up to 10 x 5 ft. If you buy larger sheets or cut longer parts, order a bigger bed, because the bed size is fixed once the machine is built.
  3. Comparing quotations on power and price alone. Two 1.5KW machines can differ in every other part, so ask each supplier to name the makes fitted and to list what the price includes.

What to Send Sigma for a 1.5KW Quotation

Put these in your enquiry, so the quotation matches your work:

  1. Metals you cut, and the thickness of most jobs
  2. How much of your work is stainless steel or aluminium, and how thick it goes
  3. Sheet size you buy, plus one part drawing in DXF or DWG
  4. Daily output you need, in sheets or parts
  5. Tube or pipe jobs, if any
  6. Floor space, and the unloading arrangement
  7. Sanctioned load and supply voltage
  8. How you will supply oxygen, nitrogen and compressed air

Frequently Asked Questions

How thick can a 1.5KW laser cutting machine cut?

Sigma’s 1.5KW machine cuts up to 12 mm of mild steel with oxygen, and up to 3 mm of stainless steel and 2 mm of aluminium with nitrogen. Nitrogen leaves the stainless steel and aluminium edges bright and free of oxide.

What is the price of a 1.5KW laser cutting machine?

Sigma’s 1.5KW laser cutting machine costs approximately ₹18 to 21 lakh, depending on the configuration, the bed size and the laser source and controller chosen. Sigma shares the exact price and delivery time on WhatsApp at +91 99090 26467.

Can a 1.5KW laser cutting machine cut pipe and tube?

Sigma’s 1.5KW flat-bed machine is built for sheet and plate. For pipe and tube, Sigma offers a tube and pipe attachment on the flat bed, or a dedicated laser tube cutting machine from 1.5KW to 12KW.

How much power does a 1500W laser cutting machine need?

Sigma’s 1500W machine requires a 380V three-phase connection able to supply up to 16KW. The 1500W is beam output only; the laser source’s own consumption, the chiller and the drives make up the rest.

Which laser source, cutting head and controller does Sigma’s 1.5KW machine use?

The laser source is Max, Raycus or IPG and the controller is Bochu FSCUT or Raytools, both chosen with your order, while the cutting head is Raytools, Bochu or OSPRI. Yaskawa servo motors drive the three axes.

Final Thoughts

A 1.5KW laser cutting machine pays its way when your regular jobs sit inside its limits and your site can supply its power and gas. Bring a sample drawing to the demo and check the cut on your own sheet before you order.


Talk to Sigma About the 1.5KW Machine

Tell Sigma what you cut: the metals, thicknesses, part sizes and monthly quantity. Sigma’s engineers will check whether 1.5KW fits that work, suggest a configuration and send you the price with the full data sheet.

Laser Cutting Machines

Call or WhatsApp +91 99090 26467 or email info@sigmalaser.co.in


Newsletter Updates

Enter your email address below and subscribe to our newsletter